EMT Practice Test

1. Question Content...

---

Question1: You are installing a server solution in a customer's data center.
How can you ensure that the installation complies with relevant electrical best practices? (Choose two.)

Question2: A Nimble storage customer is experiencing rapid data growth and needs to scale their storage resources.
Which action should the customer take first?

Question3: Match the speed and protocol with the appropriate component.

Question4: Which storage array feature duplicates all the data from one original base volume to another volume called the destination volume?

Question5: Refer to the exhibit.

You are asked to review a server configuration for a customer before it is quoted. The server will be used in a business-critical environment and high availability is required. The server configuration is shown in the exhibit.
What should be added to the configuration to ensure availability?

Question6: A customer ordered a pair of HPE SN3000B 16 Gb Fibre Channel Switches to provide Fibre Channel connectivity between VMware ESXi hosts and HPE 3PAR StoreServ 8200.
Which adapter is required to support Fibre Channel connectivity from the VMware ESXi hosts to the new switches?

Question7: A customer considers a new HPE ProLiant DL380 Gen10 as a hardware platform for their application and requires maximum physical security.
For each security-related server components, identify whether it needs to be ordered separately, or whether it is included as part of the server solution.

Question8: A customer has reported that while running an application that is streaming live data, they experience fluctuations in processor frequency as they increase the server performance.
Which HPE ProLiant Gen10 system tuning feature would help eliminate this issue?

Question9: A fast-growing customer with a NAS-based storage solution is evaluating Fibre Channel storage for their VMware environment.
How would this customer benefit from adding 16 Gb Fibre Channel storage to their environment? (Choose two.)

Question10: A customer wants to safeguard their server firmware and asks you about the HPE ProLiant Gen10 features that provide this level of security.
Which Gen10 feature best addresses the customer's concern?

Question11: A customer needs to share files cost-effectively among their Microsoft Windows server over a local network.
Which storage solution meets this requirement?

Question12: Which solution should you recommend to a customer for basic file and print services?

Question13: In which layer of the OSI model would you find an IP address?

Question14: A customer needs to locate an exact time when a link down event occurred at the FC port of Nimble storage
Which on-premises tool can the customer use?

Question15: A customer needs to replace an existing storage array. The new array must be suitable for remote office deployment and support the following:
Multi-protocol connectivity
Flash-accelerated storage
Low-cost midline SAS drives
Which HPE storage platform will meet these requirements?

Question16: Which protocol can be used to access a shared directory on a network-attached storage device?

Question17: A customer is enhancing their server and storage virtualization infrastructure. They need to maximize memory density per rack unit and provide an all-flash array to the environment.
Which HPE solutions should they install to fulfill these requirements (Select two.)

Question18: A customer needs to verify inbound packet statistics for interface Ten-GigabitEthernet 1/0/10 on an HPE FlexFabric 5900 series switch used by an iSCSI storage array.
Which command can be used in the CLI to perform this operation?

Question19: Refer to the exhibits.


A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array. You created the original configuration. How many drives can be added to the customer array? (Select two)

Question20: You are installing new drives into the internal cage of a HPE ProLiant DL380 server.
How is the drive device number set?

Question21: You need to review a warning on a Nimble storage array.
Click on the menu option that displays this information.

Question22: A customer has redundant SAN fabrics with a single HPE SN6000B 16 GB 48-port.24 SAN switch in each fabric. They plan to expand their virtualization environment by adding two HPE DL360s and an MSA 2042. Each DL360 will connect to the fabric via dual port 16 Gbps FC HBAs, and the MSA 2042 will connect with four FC Ports. The 24 ports on each switch are currently In use for other applications.
How many additional Port on demand licenses must be customer purchase for each switch if they redundantly connect all the new FC HBA ports to their existing SN600B switches?

Question23: Refer to the exhibit.

A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible network throughput.
Given the BOM in the exhibit, what do you need to add to this server to meet the customer requirement?

Question24: A customer has a small business office and is concerned that the local storage in their current ProLiant Gen 10 server with a Linux OS Is reaching maximum capacity
Which solution should you recommend to expand the customers data storage capacity?

Question25: Match the Networking Product Family to the appropriate use case:

Question26: You are troubleshooting an HPE Proliant ML350 Gen server. You determine that the active ROM is corrupt and the system has not automatically switched to the redundant ROM. You need to manually switch the ROM.
What should you do?

Question27: Which disk technology provides the lowest latency for performing random reads?

Question28: A customer needs to update a server's firmware using the latest Support Pack for ProLiant (SPP). They use a bootable USB flash drive to do so, and they select Interactive Mode on boot. Once the device boots, they are unsure how to proceed and ask for your assistance.
What can you tell them to do to easily update the firmware?

Question29: You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?

Question30: A customer needs Layer 2 switches that provide basic functionality. In the future, this customer might need to use the switches' CLI to configure VLAN and STP features.
Which category of the switches does meet the customer's needs?

Question31: A Network administrator connects two switches together with multiple links of the same speed, duplex, and media type. The administrator expected the links to be aggregated, but they are not. The administrator confirmed that the ports are part of the appropriate link aggregation groups and that the permitted VLANs match.
Switch A has the lower LACP System Priority.
Which LACP operation states describe the failure above?

Question32: A customer requires an entry-level, all-flash storage system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency.
Which HPE storage system meets the customer's requirements?

Question33: Which feature in a block storage array eliminates redundant data through the process of using indexes that refer to the original set of data?

Question34: Read the question, and then refer to the exhibit.
<Switch-A>display interface Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: Administratively DOWN Line protocol state: DOWN IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK_SFP_PLUS Unknown-speed mode, unknown-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10, 20 VLAN permitted: 10, 20 Trunk port encapsulation: IEEE 802.1q Port priority: 0 Last link flapping: 0 hours 0 minutes 18 seconds Last clearing of counters: Never Peak input rate: 78 bytes/sec, at 2011-03-31 04:55:57 Peak output rate: 15 bytes/sec, at 2011-03-30 23:00:57 Last 300 second input: 0 packets/sec 67 bytes/sec - % Last 300 second output: 0 packets/sec 14 bytes/sec - % Input (total): 62670 packets, 8565340 bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input (normal): 62670 packets, - bytes 0 unicasts, 0 broadcasts, 62670 multicasts, 0 pauses Input: 0 input errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 frame, - overruns, 0 aborts - ignored, - parity errors Output (total): 3707 packets, 1294835 bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output (normal): 3707 packets, - bytes 0 unicasts, 0 broadcasts, 3707 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures 0 aborts, 0 deferred, 0 collisions, 0 late collisions 0 lost carrier, - no carrier
A customer added a new switch to their network. They connected it using interface Ten-GigabitEthernet 1/0/1. They are using VLAN 10 and 20 for the devices in their network.
The new switch was fully operational. Then, the customer experienced a power failure later that day and could not reach any device on the new switch after the power returned.
From the output in the exhibit, would could be the issue?

Question35: You are designing a system for a customer that has a contract with a government agency. The contract requires the highest level of security algorithms possible.
Which HPE ProLiant Gen10 feature set will address this customer's needs?

Question36: Match each customer data center architecture to its network topology.

Question37: A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?

Question38: A nigh school is implementing a DHCP servers to support then production environment. They have the following requirements
* six rack servers, each with 1 CPU from Intel, at least 256GB of RAM. FC Dual Port HBA
* HPE Nimble AF20 with 17TB useable capacity
* integration into their existing HPE FlexFabric 5710 and HPE SN30O0B Fibre Channel SAN switches
if the customer needs more capacity in the future, they will use scale-out growth. Which server model should you recommend to this client?

Question39: Refer to the exhibit.

A customer purchased a server/storage environment shown in the exhibit with 1 Gb networking connectivity.
The customer is now experiencing performance issues.
Identify the correct components to upgade the network connections and improve performance on the left. Then drag those components to the answer area on the right. (Choose three.)

Question40: You are designing a server solution that requires a significant amount of memory.
Which guideline should you keep in mind when working with memory channels?

Question41: A customer needs a solution that will maintain data availability in their campus location. They require a multi-node system that can sustain multiple failures, including a full building outage.
Which HPE storage platform meets the customer's needs?

Question42: When should you use the HPE Switch Selector?

Question43: A customer with a Microsoft server environment wants to consolidate their employee home directories and other company file shares presented from an appliance as a single name space.
Which HPE product should you recommend to the customer?

Question44: You are working in a data center with multiple servers and need to update the iLO 5 user names and passwords on a regular basis.
Which tool enables you to streamline and automate this process?

Question45: What is used to identify a storage HBA port in a Fibre Channel SAN fabric?

Question46: You are troubleshooting server issues and need to troubleshoot when online and offline.
Which HPE tool should you use?

Question47: A customer is facing high and unpredictable latency on an HPE ProLiant DL380 Gen10 server equipped with P408i-a controller
Which tool can display an Array Diagnostic Report?

Question48: A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports.
They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating.
Which architecture meets the customer requirements?

Question49: A system administrator is performing the BIOS/Platform configuration of a DL380 Gen10 servers You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? {Select two.)

Question50: A customer requires a recovery strategy that provides multiple rollback points during the day for their Microsoft SQL database. The customer needs to be able to recover data instantly.
Which method meets this requirement?

Question51: A customer requires 12 Gb local storage for their VMware boot volumes, which require high-performance read cycles to enable the operating system to boot quickly.
Which drive type provides the most appropriate size and most cost-effective way to meet this requirement?

Question52: What should you configure to limit the scope of broadcast domains in an Ethernet network?

Question53: Refer to the exhibit.

You are validating a Nimble HF40 configuration created in OCA, and you receive an error when you run a CLIC check.
Which Nimble component needs to be added to the configuration to complete the solution?

Question54: You have configured a port on an HPE FlexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs.

Given the configuration above, what should happen to any of the untagged traffic coming from the VMware ESXi host?

Question55: In which protocol are REST API requests transported?

Question56: Match each adapter to its characteristic.

Question57: A customer needs a server memory subsystem that meets the following requirements:
approaches the speed of traditional DRAM
ensures high capacity, high performance, and ongoing data safety in case of a power failure
Which HPE memory feature meets the customer needs?

Question58: A customer needs to consolidate software, hardware, and backup in a single integrated solution to reduce the cost and complexity of their IT environment
Which solution meets the customer needs?

Question59: When installing servers in a rack, a customer has left gaps between the servers.
What should you tell this customer regarding the space between servers? (Select two.)

Question60: You are designing a network for a customer that needs a centrally-managed solution for their physical and virtual switches. This product must integrate with their existing third-party networking equipment.
Which HPE management solution meets the customer's needs?

Question61: A customer needs a virtual desktop infrastructure environment to quickly deploy new desktop images to more than 70 onsite contractors. They plan to use HPE ProLiant DL360 Gen10 servers running VMware ESXi connected to a shared storage device. The customer requires deduplication because they are concerned about the required storage capacity for the full clone images.
Which storage device would best address their concerns?

Question62: You are troubleshooting a HPE ProLiant rack-mount server. You notice that all front-panel status LEDs flash simultaneously.
What does this indicate has occurred on the server?

Question63: A customer needs to purchase a redundant pair of SAN switches for their virtualization environment. The customer requires a total of eight 16 Gbps FC storage ports and eighteen 8 Gbps FC host attachments.
Which switch meets the customer's needs at the lowest cost?

Question64: Which feature in a block storage array is effective in decreasing the size of blocks?

Question65: A customer needs to virtualize their storage across physical servers and storage environments.
Which HPE solution meets the customer's needs?

Question66: You are managing a HPE ProLinat rack-mount server and need to determine when the Remote Console was most recently used.
Where can you find this information?

Question67: Given the solution shown in the exhibit, which adapter is required in the server to facilitate connective in Block.1?

Question68: When should you choose to populate a server with LRDlMMs?

Question69: A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.
Which HPE server family meets the customer's needs?

Question70: A solution integrator is installing new equipment to the rack.
Click the recommended location for HPE R/T3000 Extended Runtime Module.
Hot Area:

Question71: You are troubleshooting an HPE ProLiant rack-mount server. You need to run diagnostic tests on local storage.
Which HPE tool should you use?

Question72: A customer needs to deploy an application on a newly-installed HPE ProLiant server, but they report that the server is not online. They call you for remote support. The IP address on the production network cannot be reached. You are evaluating the probable root causes of this issue.
According to the troubleshooting methodology, what are next two steps? (Select two)

Question73: You need to change BIOS configuration settings without rebooting a server.
Which system utility should you use?

Question74: You are installing an HPE StoreOnce backup system in a customer's environment. They need a simple and cost-effective method to centralize and automate the backup of multiple servers (file, virtualization, database). They also need the ability to integrate with an existing third-party backup software.
How must you configure the StoreOnce system to meet the customer's requirements?

Question75: You need to update the firmware on an MSL2024 to version 26.43.51. Which HPE utility do you need to use?

Question76: A security client needs a surveillance solution to support 239 Cameras. They expect to generate 2PB of data and require a 10Gb network infrastructure in a single rack.
Which solution should you recommend to meet the customer requirements?

Question77: You are troubleshooting a POST error on a HPE ProLiant rack-mount server. HPE support has directed you to test a minimum hardware configuration.
Which components should you remove? (Choose two.)

Question78: Match each HPE solution to its corresponding technology usage.

Question79: Which statement is true regarding configuring memory in an HPE ProLiant server?

Question80: Read the question, and then refer to the exhibit.
<Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP>
An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor.
The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor.
What must you do to resolve this issue?

Question81: Match the characteristic to the correct HPE ProLiant family.

Question82: An administrator deployed a new FlexFabric switch Into the environment and wants to collect baseline information from the switch The administrator wants to be able to use this in case there is any question from support should the administrator open a case.
Which command can the administrator use to collect support information from the switch?

Question83: Which HPE MSA storage feature enables tuning the tier-migration algorithm for a virtual volume when creating or modifying the volume?

Question84: What does the term composable mean when applied to HPE infrastructure?

Question85: What does StoreOnce use to allow independent software vendors (ISV) to be aware of the HPE StoreOnce Backup system and its capabilities without emulation?

Question86: Match the speed and protocol with the appropriate component.

Question87: You plan to perform maintenance on several systems in a rack. You need to ensure that the rack does not tip when you are working on the equipment.
What should you use?

Question88: A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years.
Which HPE ProLiant server solution meets the customer's requirements?

Question89: Where would a customer go to run the SSD wear Gauge report on an HPE ProLiant server?

Question90: A customer is considering an upgrade of their networking infrastructure with HPE FlexFabric 5940 series switch.
Match the fan tray option with the airflow direction.

Question91: You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated view of all the system health and configuration information in a single web interface.
Which HPE tool should you use?

Question92: A customer is purchasing a complete HPE solution that includes servers, storage, and networking. They need to leverage cloud storage for an off-site copy of their data in case of disaster.
Which HPE solutions should you suggest? (Choose two.)

Question93: A customer requires a software-defined storage solution.
Which storage solution meets the customer's needs?

Question94: For which virtualization management products does HPE OneView offer integration plug-ins1? (Select two.)

Question95: A customer needs to provide inventory management, health monitoring, status alerting, and reporting for their ProLiant servers.
Which HPE management offering meets the customer's needs?

Question96: A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.
Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?

Question97: Match the HPE Tool with its use case. Select all that apply.

Question98: A customer needs to share files among their Linux-based servers in a cost effective manner. The customer is concerned about compatibility with the servers in their environment that run Windows.
Which HPE StoreEasy feature addresses the customer's concerns?

Question99: A customer wants to optimize the performance or its storage array by moving data residing in one class or disks to a more appropriate class of disks based on data access patterns without manual intervention.
Which HPE storage techno logy/feature will meet the customer requirement when the data is stored on an HPE 3PAR storage?

Question100: Which tool provides a report on the current usage levels and life span of some installed read-intensive flash drives?

Question101: Which HPE solution brings together CPU, Memory, and Disk with an unpredictable workload into a single management infrastructure?

Question102: A customer requires a MSA storage system that they use for archiving dat
a. The system needs to provide a large amount of storage.
Which drive type meets the customer's needs?

Question103: A solution Integrator is installing new equipment to the rack Click the recommended location area for R3000 Gen5 UPS.

Question104: A customer needs a new VMware environment for a critical stock trading application and will need high performance compute and low latency storage.
Identify the correct component configurations on the left and drag them to the answer area on the right. (Choose two.)

Question105: You are installing an HPE ProLiant server in a rack at a customer site. The customer's facility is in a high-voltage utility service area, and they want to be certain that the power supply is supported.
Which ProLiant feature addresses the customer's concern?

Question106: Match the customer requirement to the appropriate HPE storage solution.

Question107: HPE Support asks you to generate an SSD wear gauge report for local storage on an HPE DL360 Gen10 server running VMware.
Which procedure will ensure that the server will boot directly into a maintenance state so you can generate the requested report?

Question108: A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.
Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?

Question109: A customer needs a shared storage solution for a virtualization platform that will host a database application. The customer is considering an HPE Nimble array.
Which feature would lead you to propose an HPE Nimble AF40 over an HPE 3PAR All Flash array?

Question110: Refer to the exhibit.

When performing a code upgrade on an HPE Nimble array, you noticed a connection failure on ESX1. Refer to the exhibit showing the complete zoning configuration of one of the HPE SN3000B switches.
What should you do to ensure storage access is not interrupted when doing the next update?

Question111: What can you do when installing an HPE switch to provide protection from electrostatic discharge?

Question112: You need to configure a HPE ProLiant server and plan to install an operating system that supports Secure Boot.
Which system utility should you use to configure the server?

Question113: You need to update the firmware on an MSL2024.
Which HPE utility do you need to use?

Question114: A customer is subject to regulatory requirements and their data is highly sensitive.
Which HPE Smart Array feature addresses their need for an level of security for data stored inside their server?

Question115: A customer has an existing environment that contains a mixture of network vendors. The customer wants to manage all devices using a single interface.
What should the customer use to manage the devices?

Question116: A customer requires a management solution that will provide email notifications if hardware errors occur on their servers. Which management solution provides this functionality?